← 返回列表
🔗 原文
Raspberry Pi CM4/CM5-based WisGate Connect Router RAK7392 offers 2.5GbE, mini PCIe, and WisBlock expansion

RAKwireless has just launched the WisGate Connect Router RAK7392 (not to be confused with the older WisGate Connect RAK7391), an industrial-grade edge router and gateway built around Raspberry Pi Compute Module 4/5 (CM4/CM5). The system features three Gigabit Ethernet ports, one 2.5GbE port, wireless expansion via a mini PCIe slot, and WisBlock connectors for sensors and I/O modules.

The gateway is designed for industrial IoT applications such as edge computing, VPN, Modbus-to-MQTT conversion, and LoRaWAN packet forwarding, eliminating the need for multiple boards and USB adapters for complex deployments.

WisGate Connect Router RAK7392

WisGate Connect Router RAK7392 specifications:

  • SoM options (one or the other)
    • Raspberry Pi CM4 – Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5 GHz
    • Raspberry Pi CM5 – Broadcom BCM2712 quad-core Cortex-A76 processor @ 2.4 GHz
    • Storage and Memory will depend upon the module
  • Storage – MicroSD card socket for CM4/CM5 Lite modules only
  • Networking
    • 3x Gigabit Ethernet ports (eth1, eth2, eth3)
    • 2.5 Gigabit Ethernet port (eth0, connected via PCIe switch)
    • Aggregated throughput of over 4 Gbps across all four ports
    • Wireless – Optional Wi-Fi 5 (802.11 b/g/n/ac) and Bluetooth 5.0, if supported by the selected compute module
  • USB
    • 2x USB 3.0 Type-A ports
    • USB Type-C Debug/Console UART port
    • USB Type-C port for flashing eMMC via rpiboot
  •  Expansion
    • Mini PCIe slot supporting LoRa, mioty Edge Cards, or Zigbee/Z-Wave modules
    • WisBlock Sensor slot
    • WisBlock IO slot (I2C and GPIO)
  • Misc
    • ATECC608 Crypto Chip
    • 2x SMA antenna cutouts (for Wi-Fi and MiniPCIe radio expansion)
    • PCF85063AT Real-Time Clock (RTC) with CR2032 battery backup socket (supports wake-up/watchdog)
    • Reset button and Flash switch
  • Power
    • Input – 12 VDC input via 2.1 x 5.5 mm barrel jack; includes surge protection
    • Consumption – ~5–7 W typical with CM4 (25 W PSU recommended)
  • Dimensions – 132 x 109 x 45 mm
  • Temperature Range – -20°C to 85°C (0°C to 70°C for USB 3.0 and buzzer)
  • Enclosure – Compact aluminum enclosure acts as a passive heatsink

RAK7392 block diagram
WisGate Connect Router RAK7392 block diagram
RAK7392 WisGate Connect Router Software structure
RAK7392 WisGate Connect router software structure

On the software side, RAKwireless provides RAKPiOS, a custom fork of Raspberry Pi OS that comes pre-configured with all necessary device drivers, security enhancements, and a pre-installed Docker environment. Network connectivity is handled by NetworkManager, making it easy to configure static IPs, Wi-Fi credentials, or cellular APNs via nmcli or standard connection files.

The company also provides hardware and software documentation for the RAK7392, which includes the datasheet with hardware details and pinouts, a quick-start guide for flashing RAKPiOS and configuring Ethernet, Wi-Fi, and cellular connections, and a services guide with Docker templates for LoRaWAN packet forwarders, ChirpStack, The Things Stack, Grafana, and InfluxDB. The documentation also lists compatible CM4/CM5 modules and mPCIe expansion cards.  You can also read our earlier review of the WisGate Connect (RAK7391) gateway to better understand the capabilities and software used on such a gateway/router.

WisGate Connect Router internals
WisGate Connect router internals – The Raspberry Pi CM4/CM5 module is connected to the other side of the board.
WisGate Connect Router all side view
WisGate Connect router all-side view

It’s worth noting that the RAK7392 has three GbE ports and one 2.5GbE port. Of those three, one GbE port connects directly to the CM4, while the other three Ethernet ports and two USB 3.0 ports share the CM4’s single PCIe Gen 2 lane through a PCIe switch. As a result, the ports cannot all reach their maximum speeds at the same time. RAKwireless reports around 1.8–2.0 Gbps on the 2.5GbE port and more than 4 Gbps of combined throughput across all four Ethernet ports.

There are already plenty of Raspberry Pi CM4/CM5-powered industrial gateways and routers supporting LoRaWAN connectivity (often as an option), including the AAEON SRG-CM4 IoT gateway with dual Gigabit Ethernet and industrial serial/DI/DO interfaces, the Seeed Studio reComputer R1025-10 DIN-rail edge IoT controller, the Waveshare CM4-IO-POE-4G-Box industrial system with CAN/RS232/RS485 and optional cellular connectivity, and the EDATEC ED-GWL2110 outdoor gateway, among others.

FeatureWisGate Connect Router RAK7392Seeed reRouter CM4Waveshare CM4 Router BoardSixfab Cellular Gateway
CM4 for Raspberry PiYesYesYesYes
Migration Path to CM5YesLimitedLimitedVaries
Four Ethernet PortsYesNoVariesVaries
2.5GbE InterfaceYesNoSome ModelsVaries
MiniPCIe ExpansionYes (USB + SPI)LimitedPartialCellular-Focused
Concentrator Support for LoRaYesLimitedLimitedLimited
Docker DeploymentNative via RAKPiOSUser ConfiguredUser ConfiguredUser Configured
WisBlock ExpansionYesNoNoNo
GPIO / Industrial IO ExpansionYesLimitedLimitedLimited
Protocol Gateway ApplicationsYesPartialPartialPartial
MQTT / Node-RED HostingYesYesYesYes
VPN Appliance UseYesYesYesYes
Gateway Host Platform for LoRaWANYesLimitedLimitedLimited
Industrial Edge ComputingYesModerateModerateModerate
Custom Linux Application HostingYesYesYesYes
Target DeploymentNetworking + Edge Computing + Wireless ExpansionNetworking + Edge ProjectsCM4 Networking HardwareCellular Connectivity
WisBlock Connect Router RAK7392 vs Typical CM4 Router Board (source: RAKwireless)

The WisGate Connect Router RAK7392 is sold for $535 on AliExpress or the RAKwireless store for a complete unit with a Raspberry Pi CM4 Compute Module. The exact RAM and storage configuration for the router is not clearly mentioned, so you need to contact the company for more details. RAKwireless also mentions that the hardware is designed to work with the CM5, but there’s no CM5 purchase option for now.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.

Radxa Dragon Q8B Edge AI SBC with Snapdragon 8cx Gen3 SoC
🤖 AI 总结
RAKwireless发布基于树莓派CM4/CM5的工业边缘路由器RAK7392,具备2.5GbE、mini PCIe和WisBlock扩展,适用于工业物联网场景。

RAKwireless has just launched the WisGate Connect Router RAK7392 (not to be confused with the older WisGate Connect RAK7391), an industrial-grade edge router and gateway built around Raspberry Pi Compute Module 4/5 (CM4/CM5). The system features three Gigabit Ethernet ports, one 2.5GbE port, wireless expansion via a mini PCIe slot, and WisBlock connectors for sensors and I/O modules.

The gateway is designed for industrial IoT applications such as edge computing, VPN, Modbus-to-MQTT conversion, and LoRaWAN packet forwarding, eliminating the need for multiple boards and USB adapters for complex deployments.

WisGate Connect Router RAK7392

WisGate Connect Router RAK7392 specifications:

  • SoM options (one or the other)
    • Raspberry Pi CM4 – Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5 GHz
    • Raspberry Pi CM5 – Broadcom BCM2712 quad-core Cortex-A76 processor @ 2.4 GHz
    • Storage and Memory will depend upon the module
  • Storage – MicroSD card socket for CM4/CM5 Lite modules only
  • Networking
    • 3x Gigabit Ethernet ports (eth1, eth2, eth3)
    • 2.5 Gigabit Ethernet port (eth0, connected via PCIe switch)
    • Aggregated throughput of over 4 Gbps across all four ports
    • Wireless – Optional Wi-Fi 5 (802.11 b/g/n/ac) and Bluetooth 5.0, if supported by the selected compute module
  • USB
    • 2x USB 3.0 Type-A ports
    • USB Type-C Debug/Console UART port
    • USB Type-C port for flashing eMMC via rpiboot
  •  Expansion
    • Mini PCIe slot supporting LoRa, mioty Edge Cards, or Zigbee/Z-Wave modules
    • WisBlock Sensor slot
    • WisBlock IO slot (I2C and GPIO)
  • Misc
    • ATECC608 Crypto Chip
    • 2x SMA antenna cutouts (for Wi-Fi and MiniPCIe radio expansion)
    • PCF85063AT Real-Time Clock (RTC) with CR2032 battery backup socket (supports wake-up/watchdog)
    • Reset button and Flash switch
  • Power
    • Input – 12 VDC input via 2.1 x 5.5 mm barrel jack; includes surge protection
    • Consumption – ~5–7 W typical with CM4 (25 W PSU recommended)
  • Dimensions – 132 x 109 x 45 mm
  • Temperature Range – -20°C to 85°C (0°C to 70°C for USB 3.0 and buzzer)
  • Enclosure – Compact aluminum enclosure acts as a passive heatsink

RAK7392 block diagram
WisGate Connect Router RAK7392 block diagram
RAK7392 WisGate Connect Router Software structure
RAK7392 WisGate Connect router software structure

On the software side, RAKwireless provides RAKPiOS, a custom fork of Raspberry Pi OS that comes pre-configured with all necessary device drivers, security enhancements, and a pre-installed Docker environment. Network connectivity is handled by NetworkManager, making it easy to configure static IPs, Wi-Fi credentials, or cellular APNs via nmcli or standard connection files.

The company also provides hardware and software documentation for the RAK7392, which includes the datasheet with hardware details and pinouts, a quick-start guide for flashing RAKPiOS and configuring Ethernet, Wi-Fi, and cellular connections, and a services guide with Docker templates for LoRaWAN packet forwarders, ChirpStack, The Things Stack, Grafana, and InfluxDB. The documentation also lists compatible CM4/CM5 modules and mPCIe expansion cards.  You can also read our earlier review of the WisGate Connect (RAK7391) gateway to better understand the capabilities and software used on such a gateway/router.

WisGate Connect Router internals
WisGate Connect router internals – The Raspberry Pi CM4/CM5 module is connected to the other side of the board.
WisGate Connect Router all side view
WisGate Connect router all-side view

It’s worth noting that the RAK7392 has three GbE ports and one 2.5GbE port. Of those three, one GbE port connects directly to the CM4, while the other three Ethernet ports and two USB 3.0 ports share the CM4’s single PCIe Gen 2 lane through a PCIe switch. As a result, the ports cannot all reach their maximum speeds at the same time. RAKwireless reports around 1.8–2.0 Gbps on the 2.5GbE port and more than 4 Gbps of combined throughput across all four Ethernet ports.

There are already plenty of Raspberry Pi CM4/CM5-powered industrial gateways and routers supporting LoRaWAN connectivity (often as an option), including the AAEON SRG-CM4 IoT gateway with dual Gigabit Ethernet and industrial serial/DI/DO interfaces, the Seeed Studio reComputer R1025-10 DIN-rail edge IoT controller, the Waveshare CM4-IO-POE-4G-Box industrial system with CAN/RS232/RS485 and optional cellular connectivity, and the EDATEC ED-GWL2110 outdoor gateway, among others.

FeatureWisGate Connect Router RAK7392Seeed reRouter CM4Waveshare CM4 Router BoardSixfab Cellular Gateway
CM4 for Raspberry PiYesYesYesYes
Migration Path to CM5YesLimitedLimitedVaries
Four Ethernet PortsYesNoVariesVaries
2.5GbE InterfaceYesNoSome ModelsVaries
MiniPCIe ExpansionYes (USB + SPI)LimitedPartialCellular-Focused
Concentrator Support for LoRaYesLimitedLimitedLimited
Docker DeploymentNative via RAKPiOSUser ConfiguredUser ConfiguredUser Configured
WisBlock ExpansionYesNoNoNo
GPIO / Industrial IO ExpansionYesLimitedLimitedLimited
Protocol Gateway ApplicationsYesPartialPartialPartial
MQTT / Node-RED HostingYesYesYesYes
VPN Appliance UseYesYesYesYes
Gateway Host Platform for LoRaWANYesLimitedLimitedLimited
Industrial Edge ComputingYesModerateModerateModerate
Custom Linux Application HostingYesYesYesYes
Target DeploymentNetworking + Edge Computing + Wireless ExpansionNetworking + Edge ProjectsCM4 Networking HardwareCellular Connectivity
WisBlock Connect Router RAK7392 vs Typical CM4 Router Board (source: RAKwireless)

The WisGate Connect Router RAK7392 is sold for $535 on AliExpress or the RAKwireless store for a complete unit with a Raspberry Pi CM4 Compute Module. The exact RAM and storage configuration for the router is not clearly mentioned, so you need to contact the company for more details. RAKwireless also mentions that the hardware is designed to work with the CM5, but there’s no CM5 purchase option for now.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.

Radxa Dragon Q8B Edge AI SBC with Snapdragon 8cx Gen3 SoC
原文
Raspberry Pi CM4/CM5-based WisGate Connect Router RAK7392 offers 2.5GbE, mini PCIe, and WisBlock expansion

RAKwireless has just launched the WisGate Connect Router RAK7392 (not to be confused with the older WisGate Connect RAK7391), an industrial-grade edge router and gateway built around Raspberry Pi Compute Module 4/5 (CM4/CM5). The system features three Gigabit Ethernet ports, one 2.5GbE port, wireless expansion via a mini PCIe slot, and WisBlock connectors for sensors and I/O modules.

The gateway is designed for industrial IoT applications such as edge computing, VPN, Modbus-to-MQTT conversion, and LoRaWAN packet forwarding, eliminating the need for multiple boards and USB adapters for complex deployments.

WisGate Connect Router RAK7392

WisGate Connect Router RAK7392 specifications:

  • SoM options (one or the other)
    • Raspberry Pi CM4 – Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5 GHz
    • Raspberry Pi CM5 – Broadcom BCM2712 quad-core Cortex-A76 processor @ 2.4 GHz
    • Storage and Memory will depend upon the module
  • Storage – MicroSD card socket for CM4/CM5 Lite modules only
  • Networking
    • 3x Gigabit Ethernet ports (eth1, eth2, eth3)
    • 2.5 Gigabit Ethernet port (eth0, connected via PCIe switch)
    • Aggregated throughput of over 4 Gbps across all four ports
    • Wireless – Optional Wi-Fi 5 (802.11 b/g/n/ac) and Bluetooth 5.0, if supported by the selected compute module
  • USB
    • 2x USB 3.0 Type-A ports
    • USB Type-C Debug/Console UART port
    • USB Type-C port for flashing eMMC via rpiboot
  •  Expansion
    • Mini PCIe slot supporting LoRa, mioty Edge Cards, or Zigbee/Z-Wave modules
    • WisBlock Sensor slot
    • WisBlock IO slot (I2C and GPIO)
  • Misc
    • ATECC608 Crypto Chip
    • 2x SMA antenna cutouts (for Wi-Fi and MiniPCIe radio expansion)
    • PCF85063AT Real-Time Clock (RTC) with CR2032 battery backup socket (supports wake-up/watchdog)
    • Reset button and Flash switch
  • Power
    • Input – 12 VDC input via 2.1 x 5.5 mm barrel jack; includes surge protection
    • Consumption – ~5–7 W typical with CM4 (25 W PSU recommended)
  • Dimensions – 132 x 109 x 45 mm
  • Temperature Range – -20°C to 85°C (0°C to 70°C for USB 3.0 and buzzer)
  • Enclosure – Compact aluminum enclosure acts as a passive heatsink

RAK7392 block diagram
WisGate Connect Router RAK7392 block diagram
RAK7392 WisGate Connect Router Software structure
RAK7392 WisGate Connect router software structure

On the software side, RAKwireless provides RAKPiOS, a custom fork of Raspberry Pi OS that comes pre-configured with all necessary device drivers, security enhancements, and a pre-installed Docker environment. Network connectivity is handled by NetworkManager, making it easy to configure static IPs, Wi-Fi credentials, or cellular APNs via nmcli or standard connection files.

The company also provides hardware and software documentation for the RAK7392, which includes the datasheet with hardware details and pinouts, a quick-start guide for flashing RAKPiOS and configuring Ethernet, Wi-Fi, and cellular connections, and a services guide with Docker templates for LoRaWAN packet forwarders, ChirpStack, The Things Stack, Grafana, and InfluxDB. The documentation also lists compatible CM4/CM5 modules and mPCIe expansion cards.  You can also read our earlier review of the WisGate Connect (RAK7391) gateway to better understand the capabilities and software used on such a gateway/router.

WisGate Connect Router internals
WisGate Connect router internals – The Raspberry Pi CM4/CM5 module is connected to the other side of the board.
WisGate Connect Router all side view
WisGate Connect router all-side view

It’s worth noting that the RAK7392 has three GbE ports and one 2.5GbE port. Of those three, one GbE port connects directly to the CM4, while the other three Ethernet ports and two USB 3.0 ports share the CM4’s single PCIe Gen 2 lane through a PCIe switch. As a result, the ports cannot all reach their maximum speeds at the same time. RAKwireless reports around 1.8–2.0 Gbps on the 2.5GbE port and more than 4 Gbps of combined throughput across all four Ethernet ports.

There are already plenty of Raspberry Pi CM4/CM5-powered industrial gateways and routers supporting LoRaWAN connectivity (often as an option), including the AAEON SRG-CM4 IoT gateway with dual Gigabit Ethernet and industrial serial/DI/DO interfaces, the Seeed Studio reComputer R1025-10 DIN-rail edge IoT controller, the Waveshare CM4-IO-POE-4G-Box industrial system with CAN/RS232/RS485 and optional cellular connectivity, and the EDATEC ED-GWL2110 outdoor gateway, among others.

FeatureWisGate Connect Router RAK7392Seeed reRouter CM4Waveshare CM4 Router BoardSixfab Cellular Gateway
CM4 for Raspberry PiYesYesYesYes
Migration Path to CM5YesLimitedLimitedVaries
Four Ethernet PortsYesNoVariesVaries
2.5GbE InterfaceYesNoSome ModelsVaries
MiniPCIe ExpansionYes (USB + SPI)LimitedPartialCellular-Focused
Concentrator Support for LoRaYesLimitedLimitedLimited
Docker DeploymentNative via RAKPiOSUser ConfiguredUser ConfiguredUser Configured
WisBlock ExpansionYesNoNoNo
GPIO / Industrial IO ExpansionYesLimitedLimitedLimited
Protocol Gateway ApplicationsYesPartialPartialPartial
MQTT / Node-RED HostingYesYesYesYes
VPN Appliance UseYesYesYesYes
Gateway Host Platform for LoRaWANYesLimitedLimitedLimited
Industrial Edge ComputingYesModerateModerateModerate
Custom Linux Application HostingYesYesYesYes
Target DeploymentNetworking + Edge Computing + Wireless ExpansionNetworking + Edge ProjectsCM4 Networking HardwareCellular Connectivity
WisBlock Connect Router RAK7392 vs Typical CM4 Router Board (source: RAKwireless)

The WisGate Connect Router RAK7392 is sold for $535 on AliExpress or the RAKwireless store for a complete unit with a Raspberry Pi CM4 Compute Module. The exact RAM and storage configuration for the router is not clearly mentioned, so you need to contact the company for more details. RAKwireless also mentions that the hardware is designed to work with the CM5, but there’s no CM5 purchase option for now.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.

Radxa Dragon Q8B Edge AI SBC with Snapdragon 8cx Gen3 SoC
中文翻译
Raspberry Pi CM4/CM5-based WisGate Connect Router RAK7392 offers 2.5GbE, mini PCIe, and WisBlock expansion

翻译尚未生成